User's Manual

P-720 User’s Guide v1.0 Jun 10, 2005
Page 29 of 51
Total Output Power (EIRP) – the P-720 transmission output power (EIRP) in dBm. Seven levels are
specified: 17dBm, 16dBm, 15dBm, 14dBm, 10dBm, 4dBm and 0dBm. Default is 14dBm.
Total Output Power (EIRP) = Antenna Gain + RF card output power
The range of the EIRP varies with channel.
RTS Threshold – when set, this settings specifies the maximum packet size beyond which RTS/CTS
mechanism is be invokes. The value range of this is [0 …2347]. Default is 2347 which means that
RTS is disabled.
Layer 2 Isolation – Layer2 wireless client separation. Connected clients with user isolation function
enabled cannot access each other directly. The clients are isolated from each other using their MAC
addresses [enabled/disabled].
Mode – two modes are supplied: AP mode and Bridge mode.
For such each change of settings, the P-720 needs to be restarted to apply all settings changes when
clicking Apply Changes. Request for reboot server appears:
Figure 32 – Reboot Server
Reboot – Click the button to restart the server and apply the changes.
If there is no other setting needed to be modified, click the Reboot button for
applying all modifications.
And if there are still other setting modifications needed, go ahead to finish all
changes and then click Reboot button to restart and apply all settings together.
FCC