User's Manual

P-720 User’s Guide v1.0 Jun 10, 2005
Page 25 of 51
DHCP Relay
To route DHCP through the external server, enable the DHCP Relay service.
Figure 24 – DHCP Relay settings
Server IP: enter the IP address of the external DHCP server.
Change status or leave in the default state if no editing is necessary and click the Save button.
Figure 25 –Apply or Discard DHCP relay Settings
For each change of settings, the P-720 needs to be restarted to apply all settings changes when
clicking Apply Changes. Request for reboot server appears:
Figure 26 – Reboot information
Reboot – Click the button to restart the server and apply the changes.
If there is no other setting needed to be modified, click the Reboot button for
applying all modifications.
And if there are still other setting modifications needed, go ahead to finish all
changes and then click Reboot button to restart and apply all settings together.