User's Manual

P-720 User’s Guide v1.0 Jun 10, 2005
Page 16 of 51
This chapter contains web management reference information.
The web management main menu consists of the following sub menus:
 Status
– device status showing
 Network – device settings affecting networking
 Wireless – device settings related to the wireless part of the P-720
 System – device system settings directly applicable to the P-720
 Exit – click exit and leave the web management then close your web-browser window.
Web Interface
The main web management menu is displayed at the top of the page after successfully logging into
the system (see the figure below). From this menu all essential configuration pages are accessed.
Figure 8 – Main Configuration Management Menu
The web management menu has the following structure:
Status
Device Status – show the status related with the whole device
Wireless Status – show the status of the two radios
Network
Interface – TCP/IP settings of P-720 LAN (Bridge) port
RADIUS Server – specify the settings of RADIUS server which is used by 802.1x or WPA
DHCP Settings– specify the settings of DHCP server or DHCP relay service
Wireless
Basic
– specify the basic settings related with wireless part
Advance
– specify the settings of multiple BSSID or Bridge
WEP – specify the WEP settings related with static WEP encryption
MAC ACL – MAC ACL settings for P-720
System
Security – set access permission to your P-720
SNMP – SNMP service
Telnet
– Telnet/SSH service
Configuration
– system configuration utilities, including Backup/Upload configuration
Reset – reboot device and restore systems to factory default
Upgrade – Upgrade the firmware remotely
In the following sections, short references for all menu items are presented.
Chapter 4 – Reference Manual