User's Manual

P-720 User’s Guide v1.0 Jun 10, 2005
Page 12 of 51
Step 1 Place the Access Point on a flat work surface or hang on the wall.
Step 2 Use the enclosed Ethernet patch cable to connect the LAN port of the Access Point to the
Switch or hub in the local network.
Step 3 Connect the power supply to the Access Point.
Software Installation
Initialization
For the first web browser connection to your P-720, please use your Web browser
The default network settings for your new access point are:
LAN port: IP 192.168.2.2 subnet 255.255.255.0
Step 1 Configure your PC with a static IP address on the 192.168.2.0 subnet with mask
255.255.255.0. Connect the P-720 in to the same physical network as your PC. Open
the Web browser and type the default IP address of the P-720:
https://192.168.2.2
Step 2 Enter the P-720 administrator login details to access the Web management.
The default administrator log on settings for all access point interfaces are:
User Name: admin
Password: admin01