User's Manual Part 2

User’s Guide Chapter 7 – Reference Manual
Figure 158 – Firmware Auto-update Configuration
Status - defines if auto-update is enabled or disabled. Default value disabled.
Update URL - defines where firmware should be downloaded from. It points directly to firmware
update file. URL should be accessible without any user authentication. URL can use HTTP, HTTPS
and FTP protocols. Default value - empty string.
Update interval – time interval between each update in hours [1-9999]. Time is counted from last
device boot-on. Default value is 48 hours.
Delay – delays update process by given amount of hours. This should prevent from getting hundreds
requests for firmware download at the same time [0-24]. Default value is 0.
Save - save new firmware auto-update settings.
On boot auto-update feature checks for available updates on specified server at
given URL. If there is different version - device downloads, installs firmware update
and reboots. If firmware version matches current version on device - no update
takes place.
Gemtek Systems Page 109