User's Manual Part 2

User’s Guide Appendix

https://P560_ip_address/logout.user with parameter 'cmd' with value 'logout'.

Entering the following address into the browser will disconnect the currently logged in user:

https://P560_ip_address/logout.user?cmd=logout

Upload Templates

All user pages files (welcome.xsl, login.xsl, logout.xsl, help.html, unauthorized.html) can be on an

external server or on the P560. Which templates are to be used is found in user interface |

configuration | pages. The P560 has default user templates that can be replaced by uploading new

templates. Any uploaded templates and images overrides the default templates.

Next to predefined templates, there are supported image types:

 PNG

 GIF

 JPG

Supported cascading style sheets:

 CSS

Uploaded file types are detected by their extension.

Use of cascading style sheets (css) is not required, but recommended.

The Hotspot-in-a-Box administrator is responsible to conduct tests to ensure that all uploaded

templates are correct and work as expected. After the upload, the controller does not verify the

correctness of the uploaded templates. If the controller is not able to load the uploaded xsl template,

it will use the default build-in templates.

Image Location

Designers who prepare custom user templates should take note of the location of the images used.

All uploaded images, style sheets and static HTML pages (help.html and unauthorized.html) are

located at the virtual directory 'images'. Uploaded image example.gif will be accessible at the

following path: 'images/example.gif'

Using other paths like 'webserver/example.gif' or 'example.gif' will redirect to

images/unauthorized.html' or if UAM is enabled to user page (welcome.user, login.user or logout.user

depending on device configuration and user status).

This is an example of how to use an image in a XSL template:

Gemtek Systems Page 144