User's Manual Part 2

User’s Guide Appendix
E) Standard RADIUS Attributes
The following standard RADIUS attributes and messages are supported by the Hotspot-in-a-Box.
The Gemtek System vendor specific attributes are described at the client point of
view (reverse accounting is disabled).
Required Attribute # Type Auth Req Auth
Reply
Acctg Req Comment
User-Name 1 String X X User enters full NAI
User – Password 2 String X
Password of the user to be
authenticated
NAS–IP–Address 4 Ipaddr X X
IP Address of the Hotspot-in-
a-Box
Service-Type 6 Integer X Must be set to Login (1)
Framed-IP-Address 8 Ipaddr X X IP Address of the User
Reply-Message 18 String X
Text of reject reason if
present
State 24 String X X
AC does not interpret the
attribute locally
Class 25 String X X
Attribute provided by the
Auth. Server, forwarded to
the accounting server
Session-Timeout 27 Integer X
Forced logout once timeout
period reached (seconds)
Idle-Timeout 28 Integer X
Implicit logout inactivity
timeout period (seconds)
Called-Station-ID 30 String X X
This field should contain the
MAC address or other
information identifying the
Hotspot-in-a-Box
NAS-Identifier 32 String X X String identifying the NAS
Acct-Status-Type 40 Integer X
1=Start, 2=Stop, 3=Interim
Update
Acct-Delay-Time 41 Integer X
Delay (seconds) between
Acctg Event and when Acct-
Req sent (doesn’t include
estimated network transit
time)
Acct-Input-Octets 42 Integer X
Indicates how many octets
have been received from
the port over the course of
this service being provided
Acct-Output Octets 43 Integer X
Indicates how many octets
have been sent to the port in
the course of delivering this
service
Acct-Session-ID 44 String X X X
Unique Accounting ID to
make it easy to match start
and stop records in a log file
Gemtek Systems Page 133