User's Manual Part 2

User’s Guide Appendix
system access snmp proxies
<action> Action to take upon SNMP proxy entry: A(dd), E(dit) or D(elete).
<id> Entry id. Needed only with Edit and Delete actions.
-t <type>
Proxy type. May have values v1, v2c. Can be used only when
adding or editing proxy.
-a <ip_address> Proxy ip address.
-c <community_name> Proxy community name.
-l <oid_local> Proxy local OID.
-r <oid_target> Proxy target OID.
system access snmp settings
-s <status> Status of SNMP service.
-n <name> System name.
-l <location> Location of the device.
-c <contact> Contact information.
-b <public_name> Public name of SNMP service.
-r <private_name>: Private name of SNMP service.
system access snmp traps
<action> Action to take upon SNMP trap entry: A(dd), E(dit) or D(elete)
<id> Entry id. Needed only with Edit and Delete actions.
-c <community> SNMP community string.
-a <ip_address> SNMP trap host address.
-p <port> SNMP trap port.
-t <type> SNMP trap type: v1, v2 or inform.
system access snmp users
<id> User id.
-n <name> SNMP user name.
-p <password> SNMP user password.
system access telnet
<status> Change telnet service status: enabled or disabled.
system access uat
<interface> Active LAN interface.
-s <status> UAT status on interface.
-a <ip> Network of UAT address pool.
-m <netmask> Netmask of UAT address pool.
System Configuration Commands
system configuration
clock Manual setting of internal device clock.
ntp Configuration of Network time Protocol service.
syslog For sending system and debug messages via syslog protocol.
trace Displays the last logged messages.
Gemtek Systems Page 130