User's Manual Part 2

User’s Guide Appendix
-c <channel> PPTP channel. Used only with A and E actions.
-s <server> PPTP server ip address. Used only with A and E actions.
-u <username> PPTP username. Used only with A and E actions.
-p <password> PPTP password. Used only with A and E actions.
-e <encryption>
PPTP encryption status: enabled or disabled. Used only with A
and E actions.
-a <network> PPTP remote network address. Used only with A and E actions.
-m <netmask> PPTP remote network netmask. Used only with A and E actions.
Wireless Commands
wireless
acl Static ACL configuration.
advanced Advanced wireless settings
basic Basic wireless settings.
security Wireless security configuration.
wds Wireless Distribution System (WDS) configuration.
wireless acl
-s <status> Static ACL status: enabled or disabled.
-d <policy> Default ACL policy: allow or deny.
-aa <mac> Add MAC address to 'allow' list.
-ad <mac> Add MAC address to 'deny' list.
-ra <mac> Remove MAC address from 'allow' list.
-rd <mac> Remove MAC address from 'deny' list.
wireless advanced
-i <isolation> Layer 2 isolation: enabled or disabled.
-s <ssid_broadcasting SSID broadcasting: enabled or disabled.
-f <fragmentation> Fragmentation threshold: 256-2346.
-r <rts> RTS threshold: 0-2347.
-p <power> Wireless card output power in dBm.
-a Print valid output power range for current regulatory domain.
-g <gain> Wireless card antenna gain in dBi.
wireless basic
-s <ssid> SSID name.
-d <domain> Regulatory domain name.
-l Print available regulatory domains.
-m <mode>
Wireless network mode: B-only, B(WiFi), Mixed(WiFi), Mixed,
Mixed/G (WiFi), G(WiFi).
-c <channel> Channel selection.
-a Print available channels for current regulatory domain
wireless security
-s <mode> Wireless security mode: disabled, wep64, wep128, wpakey.
-k <key> Pre-shared key.
Gemtek Systems Page 127