User's Manual Part 2

User’s Guide Appendix
-t <timeout>
Maximal amount of time before retrying RADIUS packets (in
seconds).
-n <nas> NAS Server identification string.
-o <user_timeout>
Amount of time from user side (no network carrier) before closing
the connection (in seconds).
-a <acct_update>
Period after which server should update accounting information
(in seconds).
-c <acct_retry>
Retry time period in which server should try to update accounting
information before giving up (in seconds).
-i <idle>
Amount of user inactivity time, before automatically disconnecting
user from the network (in seconds).
-u <bandwidth> Default Radius user upload bandwidth.
-d <bandwidth> Default Radius user download bandwidth.
network radius wisp
<action> A(dd), D(elete)
<id> WISP Id. Usable only with D action.
<name> WISP name. Usable only with A action.
<radius_id>
WISP Radius server id (from Radius authentication server list).
Usable only with A action.
<interface>
Interface name to which the WISP should be bound or none.
Usable only with A action.
Network Tunnels Commands
network tunnels
gre GRE client setup.
ppp PPTP, PPPoE and GRE setup.
pptp4vpn PPTP for VPN setup.
network tunnels gre
-s <status>
Gre status: enabled or disabled. When enabling, gre tunnel will be
created.
-r <ip> Remote host ip.
-d <ip> GRE device ip
-m <netmask> GRE device netmask. e.g. 255.255.255.0
-n <ip/netmask> Gre route. e.g. 192.168.6.0/24.
network tunnels ppp
-s <status> Status: disabled/PPTP/PPPoE/GRE.
-n <name> PPPoE/PPTP username.
-p <password> PPPoE/PPTP password.
-e <encryption>: PPPoE/PPTP encryption status: enabled or disabled.
-a <server> PPTP server ip address/GRE remote address.
-i <ip> GRE interface address.
-m <netmask> GRE interface netmask.
network tunnels pptp4vpn
<action> A(dd), D(elete) or E(dit) entry.
Gemtek Systems Page 126