User's Manual Part 2

User’s Guide Appendix
B) Factory Defaults for the Access Controller
Network Interface Configuration Settings
Configuration | Interface Configuration
Interface Eth0
Status Enabled
Type LAN
IP Address 192.168.4.1
Netmask 255.255.255.0
Gateway Ixp1
Interface Ixp1
Status Enabled
Type WAN
IP Address 192.168.2.66
Netmask 255.255.255.0
Gateway 192.168.2.1
Interface Ixp0
Status Enabled
Type LAN
IP Address 192.168.3.1
Netmask 255.255.255.0
Gateway Ixp1
Configuration | VLAN
No VLAN entries are defined on system.
Configuration | Route
No routes are defined on system.
Configuration | Port Forwarding
No port forwards defined.
Configuration | Management Subnet
Interface Eth0
Status Disabled
IP Address 0.0.0.0
Netmask 0.0.0.0
Remote Network 0.0.0.0
Remote Netmask 0.0.0.0
Interface Ixp0
Status Disabled
IP Address 0.0.0.0
Netmask 0.0.0.0
Remote Network 0.0.0.0
Remote Netmask 0.0.0.0
Gemtek Systems Page 115