User's Manual Part 2

User’s Guide Appendix
A) Access Controller Specification
Technical Data
Wireless
Standard
IEEE 802.11g (OFDM), IEEE 802.11b (DSSS), 2.4GHz ISM band, Wi-Fi
compliant
Data Rate
802.11g: 54, 48, 36, 24, 18, 12, 9, 6 Mbps, 802.11b: 11Mbps, 5.5Mbps, 2,
1Mbps (auto fall back)
Client Stations
Max. 250 simultaneous client stations (depending on SW license Bronze,
Silver, Gold)
Typical range 50 meters in indoor environments, up to 300m outdoors
Transmit Power Max. 17 dBm (EIRP)
Antennas Two 2dBi dipole antennas with space diversity, SMA connectors.
Encryption WPA, TKIP, WEP64, WEP128
WDS Wireless Distribution System for up to 7 APs
Network and Hotspot Access Control
 IP Router with NAT/PAT, firewall filters  Hotspot access controller with web browser log-
on (UAM) and 802.1x/EAP support, Smart Client
support, MAC authentication, WISPr compliant
(Wi-Fi alliance)
 AAA RADIUS client and proxy server
with EAP support
 Universal access method (web browser log-on)
with XML support and walled garden (free web
sites)
 Universal address translation and web
proxy support (any client configuration
is accepted)
 WISPr compatible log-on via web browser,
SSL/TLS support UAT
 VPN client (PPTP, GRE)  IEEE 802.1x authenticator with EAP-SIM, MD-5,
TLS, TTLS, PEAP
 WPA support  DHCP server, DHCP relay gateway, DHCP client
 VPN pass-through  Layer 2 user isolation
 E-mail redirection  Bandwidth management via RADIUS
Interface
WAN 10/100Mb Ethernet, auto sensing, RJ-45
LAN
Four 10/100Mb Ethernet port switched, auto sensing, RJ-45, 802.1q
VLAN support
WLAN Two SMA antenna connectors
Management
Interfaces
HTTPs, Telnet, SNMP (MIB II, Ethernet MIB, bridge MIB, private MIB),
Terminal
Software Update Remote software update via HTTPs
Reset Remote reset / Manufacturing reset
Physical Specification
Dimension 195 mm x 160 mm x 27 mm
Appendix
Gemtek Systems Page 113