User's Manual Part 2

User’s Guide Chapter 7 – Reference Manual
Connection | E-mail Redirection
The outgoing mail (SMTP) server redirection is performed using the e-mail redirection menu. By
default such redirection settings is displayed:
Figure 162 – E-mail Redirection Settings
Click the edit button to specify your outgoing mail server settings.
Figure 163 – Edit E-mail Redirection
Status – enable/disable e-mail redirection function.
Host – SMTP server address where to redirect the outgoing clients e-mails [enter host name or host
IP address].
Port – port number [number, by default: 25].
Save – save new e-mail redirection settings.
Connection | Station Supervision
The station supervision function is used to monitor the connected host station availability. This
monitoring is performed with ping. If the specified number of ping failures is reached (failure count),
the user is logged out from the AC.
Figure 164 – Station Supervision
To adjust the ping interval/failure count, click the Edit button.
Figure 165 – Edit Station Supervision
Interval – define interval of sending ping to host [in seconds].
Failure Count – failure count value after which the user is logged out from the system.
Save – save station supervision settings.
Cancel – cancel changes.
Gemtek Systems Page 112