User's Manual Part 2

User’s Guide Chapter 7 – Reference Manual
Interface – name of interface, through which client is connected.
User IP – IP address, from which the user’s connection is established. Address is presented in digits
and dots notation.
MAC Address – hardware address of the network device from which the user is connected.
Authentication mode – authentication method which user uses to connect.
WISP – WISP domain name where the user belongs.
Session ID – the unique user’s session ID number. This can be used for troubleshooting purposes.
Session Time – session time duration since user login [hours: minutes: seconds/unlimited].
Remaining Time – remaining user’s session time [hours: minutes: seconds/unlimited]. Session time
for user is defined in the RADIUS server.
Idle Time - amount of user inactivity time [hours: minutes: seconds].
Input Bytes - amount of data in bytes, which the user network device has received [Bytes].
Output Bytes - amount of data in bytes, transmitted by the user network device [Bytes].
Remaining input/output/total bytes – user session remaining input/output bytes. WISP Operator
can define the user session in bytes. Remaining bytes is received from RADIUS [Bytes/unlimited].
Bandwidth downstream/upstream – user upstream and downstream bandwidth [in bps].
Back – returns to connected client’s statistics list.
Logout User – click this button to explicitly logout user from the network.
Refresh – click the button to refresh users’ statistics.
Gemtek Systems Page 111