User Manual

User’s Guide Chapter 4 – Reference Manual
Figure 69 – Detected Access Points with Internal Radio
BSSID – displays the MAC address of the remote access point.
SSID – displays the network name (SSID) of the remote access point.
Data Rates – displays the range of data transmission rates supported by a device in megabits per
second (Mbps).
Channel – displays the channel of the remote access point.
Age – shows the age in seconds of the last information received from the remote AP. The age is reset
to 0 if any activity of this access point is detected.
RSSI – displays the Received Signal Strength Indication (RSSI) of the remote access point.
Status | Clients | WDS Links
This page displays status information about current bridge connections to other APs (WDS links).
Figure 70 – WDS Link Statistics Table
Peer address – displays the MAC address of the remote WDS access point/bridge.
Name – shows the name of the WDS Link.
SSID – displays the SSID of the access point.
Data Rates – displays the data rates.
Channel – displays the radio channel for transmit and receive
Age – shows the age in seconds of the last information received from the remote AP. The age is reset
to 0 if any activity of this access point is detected.
RSSI – displays the Received Signal Strength Indication (RSSI) of the remote access point.
Gemtek Systems Page 68