User Manual

User’s Guide Chapter 4 – Reference Manual
RTS Success Count – displays the total of successfully received RTS packets.
RTS Failure Count – displays total of not received RTS packets.
ACK Failure Count – displays total of expected but not received ACK (acknowledgement) frames.
Received Fragment Count – displays total of each successfully received MPDU (MAC Protocol Data
Unit) of type Data or Management.
Received Multicasts Count – displays the total of MSDU, received with the multicast bit set in the
destination MAC address.
FCS Errors – displays count of FCS (Frame Check Sequence) errors in received MPDU.
WEP Undecryptable – displays the number of not decrypted frames.
Status | Statistics/Usage | Event Reporting
The event reporting system informs about internal services and provides debug messages in case of
malfunctions or network problems. The trace system can help operators to locate mis-configurations
and system errors. Use the Status | Statistics/Usage | Event Reporting menu to view current syslog
messages in case of troubleshooting of one of the services:
Figure 67 – Event Reporting
Reset Eventlog – delete all displayed logged messages.
Report Level – shows how important the event (or how critical the error) is
[Emergency/Alert/Critical/Error/Warning/Notice/Info/Debug].
Gemtek Systems Page 66