User Manual

User’s Guide Chapter 4 – Reference Manual
Figure 59 – Delete Trap Host IP
OK – removes selected SNMP manager IP addresses from the system.
Cancel – close the window without saving information.
Configuration | System | NTP Settings
The NTP (Network Time Protocol) is used to synchronize the clock of the access point to a selected
time reference. You can synchronize the system clock settings using the Configuration | System |
NTP Settings menu:
Figure 60 – NTP Settings
Local Time – displays the current system date and time.
Enable NTP – select this option if you want to specify auto time settings (using NTP server).
Time Zone (+/-hh:mm) – specify time zone for NTP time [-12.00 – +12.00]. The NTP server returns
GMT + 00.00 time if not specified otherwise.
The Time Zone is taken into account for the time displayed in the management
GUI, however the system works on GMT (UTC)
Gemtek Systems Page 61