User Manual

User’s Guide Chapter 4 – Reference Manual
Cancel – close the Add OID window without saving information.
Use the SNMP agent to discover what OIDs are implemented on P-520r and can be
monitored on the GMS server.
Configuration | System | SNMP Traps
SNMP is another management interface for the P-520r. In particular it provides the ability to send trap
messages with notifications or alarms to a management system. You can configure the SNMP agent
in P-520r to send SNMP traps to one or more SNMP managers. By default no SNMP manager hosts
are defined:
Figure 57 – SNMP Traps Table
To add a new trap host IP address for P-520r click the Add button and a new pop-up window Add
Trap Host IP Address appears:
Figure 58 - Add Trap Host IP
IP Address – specify the SNMP manager IP address.
OK – saves added SNMP manager IP address into configuration.
Cancel – close the window without saving information.
Click the Delete button to delete desired SNMP traps hosts and a new pop-up window Delete Trap
Host IP addresses appears. You can select the hosts’ IP addresses that should be deleted as shown
on the following example:
Gemtek Systems Page 60