User Manual

User’s Guide Chapter 4 – Reference Manual
Specify the alarms settings:
Figure 54 – Specify the Alarm Settings
Use Alarms – select the checkbox if need to enable the alarm gathering.
Level – specify the message level [emergency/alert/critical/error/warning/notice/info/debug].
Messages that have this level or any level of greater importance are considered alarms and are
reported to the RCMS agent. Default – errors.
Specify the heartbeat settings:
Figure 55 – the Heartbeat Settings
URL – specify the URL of the GMS server that heartbeat notifications are sent to (and, subsequently,
server responses are read from and processed)
Interval – specify the interval, in seconds, between subsequent heartbeat notifications. Default: 30.
You can configure the device monitoring specifying the Object Identifier (OID) and the name of the
statistic to gather the information from. Simply click Add button under the table and specify settings:
Figure 56 – Add the OID
Name – specify optional attribute name.
Object Identifier (OID) – specify the local SNMP OID to gather the information from [SNMP OID]
Up to 16 OIDs can be added on the system.
OK – click to add OID in the table.
Gemtek Systems Page 59