User Manual

User’s Guide Chapter 4 – Reference Manual
Backup Configuration allows you to download the current system configuration and save to a file.
Simply click the Backup button and specify the file location and name.
Figure 47 – Download System Configuration File
Backup – save the configuration as a file on your computer.
Restore Default Configuration sets the device back to its original or default configuration
Check the Factory defaults values in the Appendix section: C) Factory Defaults
Values for the P-520r Access Point
Figure 48 – Restore Default Configuration
Restore – reset device to factory default values.
Keep in mind that resetting the device is an irreversible process.
Please note that also the administrator password will be set back to the factory
default.
Reboot. Click this button to reboot the access point:
Figure 49 – Reboot the Access Point
Configuration | System | GMS Agent
At the heart of the P-520r management subsystem is a simple text based configuration file and GMS
agent which in pair with GMS server creates a structure for fast wireless network deployment and
robust administration. Properly configured the GMS agent can:
 send heartbeat notifications with standard and optional information to the GMS server,
 report device's extended status configuration to the GMS server,
 report device's current configuration to the GMS server,
 download and apply/merge full or partial configuration from the GMS server,
 download and update device's firmware from the GMS server.
The GMS agent starts at the very end of the system startup process. It reads its configuration directly
from the system configuration file.
Enable the GMS agent:
Figure 50 – Enable the GMS Agent
Gemtek Systems Page 56