User Manual

User’s Guide Chapter 4 – Reference Manual
Figure 44 – Change Administrator's Password
New Password – specify new password value used for user authentication in the system [4-32
characters].
Confirm Password – re-enter the new password to verify its accuracy.
Change Password – changes new specified administrator’s password.
The password is also the SNMP Read-write community string. If the password is
changed the SNMP community string will be changed as well.
Use Lock Access Point to prevent modifications to the current device configuration.
Figure 45 – Lock Access Point
Lock Access Point – click the button to lock the P-520r.
This action denies system configuration modifying. You will not be able to configure any of device
settings. To unlock the access point you need the physical access to the P-520r and press the reset
button on the device for 1 second.
Keep in mind that reset button will set the administrator password back to default:
User Name: admin
Password: admin01
Configuration | System | Backup/Restore
To restore s saved system configuration, set factory defaults or download current system
configuration use the Backup/Restore menu.
Restore Configuration allows you to upload a backup configuration from disk to the P-520r. Simply
select the configuration file from disk and click upload:
Figure 46 – Upload System Configuration File
Browse – specify file you want to upload location.
Upload – upload system configuration on the system.
Gemtek Systems Page 55