User Manual

User’s Guide Chapter 4 – Reference Manual
The pre-shared key must match the one configured on your WLAN client stations.
Back – return to the main
Wireless Security Settings page.
Cancel – restore all previous values.
Apply – save changed configuration.
WPA with RADIUS server makes use of external AAA (RADIUS) server to generate and exchange
dynamic WPA keys between P-520r and the client stations. To configure WPA with a RADIUS server
select the WPA with RADIUS server security method radio button and enter the Group Key Rekey
settings:
Figure 43 – WPA with RADIUS Server Settings
No rekeying – indicates that Group Key will not be rekeyed.
Rekey every … minutes – specify amount of minutes and WPA automatically will generate a new
Rekey every … minutes – specify the time period in minutes, after which the group key will be
updated [1-71582788]. Default value is 60 minutes.
Rekey every … x1000 packets – specify the number of transmitted packets, per 1000 packets, after
which the group key value will be updated [1-4294967295]. Default value is 10x1000 packets.
Update Group Key if station leaves BSS – when selected, the group key value will be updated if
wireless client leaves BSS.
Configuration | Security | Wireless Security | Management Security
Use the Configuration | Security | Wireless Security | Management Security menu for changing
the administrator’s password and to lock the access point for any further configuration changes.
The default administrator settings for all access point interfaces are:
username - admin
password - admin01
The username is not configurable parameter, so it cannot be changed.
Gemtek Systems Page 54