User Manual

User’s Guide Chapter 4 – Reference Manual
Figure 40 – Wired Equivalent Privacy (WEP) Settings
Enter the encryption key to be used to encrypt and decrypt wireless traffic:
64-bits – specify pre-shared key as 5 colon-separated HEX (0-9, A-F, and a-f) pairs (e.g.
00:AC:01:35:FF).
128-bits – specify pre-shared key as 13 colon-separated HEX (0-9, A-F, and a-f) pairs (e.g.
00:11:22:33:44:55:66:77:88:99:AA:BB:CC).
Back – return to the main
Wireless Security Settings page.
Cancel – restore all previous values.
Apply – save changed configuration.
The same encryption key must also be entered into the WLAN card configuration of
the mobile clients.
Configuration | Security | Wireless Security | 802.1x Security
802.1X security is available only if RADIUS server is configured on the P-520r
system.
Use the Configuration | Security | Wireless Security| 802.1x Security menu to setup the 802.1X
security settings. This security always uses dynamic WEP keys which length you can choose by
simply selecting the radio button.
To enable 802.1x security, select the checkbox and choose the desired Key Size and settings for
Rekeying:
Gemtek Systems Page 52