User Manual

User’s Guide Chapter 4 – Reference Manual
Figure 37 – RADIUS Servers' Settings
Re-authentication Time – specify the number of seconds after which the access point re-
authenticates client stations [0-2147483647]. The default value is 3600 seconds. If 0 is entered it
means that stations will not have to re-authenticate as long as they are connected.
IP address – displays RADIUS server’s IP address.
Port Number – displays RADIUS server’s port number.
Type – displays RADIUS server’s type.
Add – click to add RADIUS server.
Delete – click to remove selected RADIUS server.
Back – to return to the main
Wireless Security Settings page.
Cancel – to restore all previous values.
Apply – to save changed configuration.
In the default configuration no RADIUS servers are define on the system. Click the Add button to add
new RADIUS server and new pop-up window Add RADIUS server appears. You can define the
RADIUS server’s parameters as shown on the following example:
Figure 38 – Add RADIUS Server
Server Type – select the RADIUS server’s type [authentication/accounting].
Gemtek Systems Page 50