User Manual

User’s Guide Chapter 4 – Reference Manual
Figure 34 – Access Control List (ACL) Settings
You can further create your own access list if you need to define special access rules for specific
network devices. The access control list is based on the network device's MAC address. In the
access control table, you need only specify the network device MAC address and its access policy
(accept/reject) with the new rule.
Add – click to add ACL rule.
Delete – click to remove selected ACL rule.
Back – to return to the main
Wireless Security Settings page.
Cancel – to restore all previous values.
Apply – to save changed configuration.
Click the Add button to add new ACL rule and new pop-up window Add a Client appears. The
definition of new rules is shown in the following example:
Figure 35 – Add New ACL Rule
MAC Address – specify the MAC address of the device you want to add to the ACL. The format is a
list of colon separated hexadecimal numbers (for example: 00:00:78:0A:CD:FF).
Gemtek Systems Page 48