User Manual

User’s Guide Chapter 4 – Reference Manual
Step 1 Choose the wireless MAC address of AP2 in the web configuration interface of AP1,
menu WDS Links.
Step 2 Choose the wireless MAC address of AP1 in the web configuration interface of AP2,
menu WDS Links.
Step 3 Select the same radio channel and the data rates for both APs using the Wireless
Settings menu.
Case 2 – AP with WDS (Wireless Repeater)
This example shows a configuration where one AP relays all traffic wirelessly to another AP. In the
picture below Station 1 is connected to the wired LAN via AP1 and AP2. AP 1 acts as a repeater
between Station 1 and AP2.
AP1
WDS Link
AP2
Wired LAN
AP3
WDS Link
Step 1 Choose the wireless MAC address AP2 and AP3 in the AP1 Web interface WDS
Links menu under the Configuration.
Step 2 Choose the wireless MAC address AP1 in the AP2 Web interface WDS Links menu
under the Configuration.
Step 3 Choose the wireless MAC address AP1 in the AP3 Web interface WDS Links menu
under the Configuration.
Step 4 Select the same radio channel for both APs using the Wireless Settings menu under
the Configuration.
Gemtek Systems Page 45