User Manual

User’s Guide Chapter 4 – Reference Manual
SSID – displays the SSID of the access point.
Data Rates – displays the transmit data rates of the remote access point.
Channel – displays the channel that the access point uses to transmit and receive information.
Age –indicates the age of the last information received from the remote access point in seconds.
RSSI – shows the Received Signal Strength Indication (RSSI) of the access point.
Cancel – restore all previous values.
Apply – save changed configuration.
When the required WDS Link is selected, enter the name of chosen WDS Link:
Figure 30 – Specify the WDS Link Name
Cancel – restore all previous values.
Apply – save changed configuration.
Add AP in WDS manually:
When a WDS APs is not shown in the WDS table automatically you can add it manually by entering
the MAC address of the remote AP. Click on the Add WDS Link button.
Gemtek Systems Page 43