User Manual

User’s Guide Chapter 4 – Reference Manual
When VLAN is enabled you can view this interface statistic in Status | Interface Statistics page.
There you can see such parameters as interface status, InOctets, InUcast, InMcast, OutOctets,
OutUcast and OutMcast.
Configuration | Wireless | Basic Settings
Use the Configuration | Wireless | Basic Settings menu to configure the most relevant wireless
settings of your access point.
Figure 26 – Basic Wireless Settings
IAPP – select this checkbox to enable seamless roaming of client stations between P-520r APs.
By using the Inter-Access Point Protocol (IAPP) roaming, a client can be hand-over between access
points when changing its physical location. The IAPP protocol is used to ensure all relevant session
information is delivered to the new AP to which the client is moving. IAPP roaming is compatible with
other Gemtek Systems products.
Look at the scheme for more details about IAPP roaming:
Gemtek Systems Page 39