User Manual

User’s Guide Chapter 4 – Reference Manual
Configuration
Configuration | Settings Summary
The Settings Summary page shows important information of the P-520r: its IP address, SSID, wireless
security settings and access control status. The page is not configurable but displays the current
system configuration only.
Figure 21 – Settings Summary
SSID – indicates the unique name for your wireless network.
IP Address – indicates the IP address of your P-520r.
If two addresses are displayed this means that the access point retrieved its IP address dynamically
via DHCP. The first IP address is the IGMP IP multicast address; the second IP is given from DHCP
server’s pool.
Wireless Security – indicates if security methods are enabled on your access point [None, WEP,
WPA, 802.1X].
Access Control – indicates access control status [Any client/Selected clients only].
Configuration | Identity
The identity data of the access point are displayed here. You can use the first three fields Name,
Location, Contact to describe the access point. These fields do not influence the behavior of the
access point. But are for information purposes only.
Gemtek Systems Page 36