User Manual

User’s Guide Chapter 4 – Reference Manual
Chapter 4 – Reference Manual
The following paragraphs describe capabilities and configuration parameters of the web management
interface of the P-520r Operator Access Point. When the access point is installed you can access and
configure the device using a standard web browser.
This chapter includes the following subsections:
 Configuration – to configure essential access point settings: identity, network setup, VLAN,
wireless settings, advanced wireless settings, wireless security, unauthorized configuration
settings, download/upload backup configuration, reset device to defaults, SNMP Traps, setup
GMS agent, NTP settings, automatic device reboot.
 Status – to view the system summary, interface statistics, wireless settings, event reporting, to
find connected clients.
 Setup Wizard – quick device setup wizard.
 Update - device firmware update wizard.
 Home – click and you will be redirected to the main Status Overview page.
 Contact – click to view
contact information.
Web Interface
The main menu of the web management is displayed at the top of the page after successfully logging
into the system (see the figure below). From this menu all essential configuration pages can be
accessed.
Figure 20 – Web Management Menu
By default the Status menu is activated and the current AP Status Overview page is displayed.
The web management menu has the following structure:
Gemtek Systems Page 34