User Manual

User’s Guide Chapter 3 – Quick Setup
Chapter 3 – Quick Setup
This chapter provides how to setup the P-520r Operator Access Point the step-by step.
Setup Wizard
To easily configure your access point step-by-step, choose the Setup Wizard from the main menu.
With this wizard you are able to configure the following settings:
 Select the country and regulatory domain in which you will use the access point
 Specify IP addresses (static or dynamic)
 Define the radio policy (802.11b, 802.11g or Mixed)
 Specify the network name (SSID) and the radio channel
 Choose the wireless security settings (No encryption, WEP, WPA)
 Configure the administrator’s password
Figure 9 – Main Menu
Click Setup Wizard on the top menu and follow the instructions of the Basic Setup Wizard. Click the
Next button and a new page with country selection appears.
Step 1 Country Selection
When County Selection page is displayed you can choose the country in which this access point will
be used. Just choose country from drop-down list:
Figure 10 – Country Selection
Back – click return to the main wizard page.
Next – click to continue the access point setup process.
Gemtek Systems Page 25