User Manual

User’s Guide Chapter 2 – Installation
Chapter 2 – Installation
This chapter provides installation instructions for the hardware and software components of the P-520r
Operator Access Point. It also includes the following information:
 The Packaging Contents
 System Requirements
 Hardware Introduction
 Hardware Installation
The Packaging Contents
Each Operator Access Point comes with the following:
 Wireless LAN Access Point P-520r
 Wall mounting clamp
 Tool for disassembling the housing
 Twisted pair LAN cable
 Power Adapter
 Installation CD containing software and documentation:
 P-520r User Guide in PDF format
 Release Note
 KickStart Utility
 Product Firmware
 Adobe Acrobat Readers
 Warranty Card
If any of these items are missing or damaged, please contact your reseller or
Gemtek Systems sales representative.
System Requirements
The management of the P-520r is independent of your operating system. You will need a computer
that is connected to the same IP network as the P-520r (via Ethernet) and the HTML browser (e.g.
Internet Explorer, Netscape, Opera).
A Windows operating system is required for installing and using the KickStart utility delivered with the
product CD.
For setting up the integrated 802.1x/EAP based access control function, you need to provide a
connection to a Gemtek Systems access controller or a 3
rd
party RADIUS server.
Gemtek Systems Page 13