User Manual Part 4

Remote Management
4020210 Rev
A
187
1 Click Advanced on the main screen. The Remote Management -- TR-069 Client
screen opens.
2 In the Inform field, choose one of the following options:
 Click Enable to enable the periodic "inform" messages from the residential
gateway.
 Click Disable to disable the inform messages to the residential gateway.
3 In the Inform Interval field, enter the frequency that the inform messages are sent
from the residential gateway to the auto-configuration server.
4 In the ACS URL field, enter the URL for the auto-configuration server.
5 In the ACS User Name field, enter the user name for auto-configuration server.
6 In the ACS Password field, enter the password for the auto-configuration server.
7 Check the Connection Request Authentication field.
8 In the Connection Request User Name field, enter the name of the connection
request.
9 In the Connection Request Password field, enter the password for the connection
request.
10 Click GetRPCMethods to obtain the list of remote procedural calls (RPC)
supported by the auto-configuration server.
11 Click Save/Apply to save the configuration changes.