User Manual Part 3

Incoming IP Filtering
4020210 Rev
A
151
11 In the Destination Port field, enter the port number for the server receiving the
packets. You can enter one port or a range of ports using the following format:
port or port:port.
Example: 0:5 indicates ports 0 through 5.
12 Do you want to select all of the WAN interfaces?
 If yes, check the Select All field under WAN Interfaces (Configured in
Routing mode and with firewall enabled only).
 If no, clear the Select All field under WAN Interfaces (Configured in Routing
mode and with firewall enabled only).
13 Click Save/Apply to add the filter.
Enabling the Filtering Function
To enable the filtering function, complete the following steps.
1 Click Security on the main screen. The MAC Filtering screen opens by default.