User Manual Part 3

Cha
p
te
r
5 Home Network Confi
g
uration
126 4020210 Rev
A
2 Click Wireless. The Wireless Summary screen opens.
3 In the Network Authentication field, select Mixed WPA2 Enterprise/WPA
Enterprise from the drop-down list.
4 Select Enabled or Disabled for you WPA2 Pre-authentication.
Note: In pre-authentication, a WPA2 wireless client can perform an 802.1X
authentication with other wireless access points in its range when it is still
connected to its current wireless access point.
5 In the Network Re-auth Interval, enter the interval at which the re-authentication
occurs.
6 In the WPA Group Rekey Interval field, enter the group key renewal time
period. This time defines how often the dynamic key will be regenerated.
7 In the RADIUS Server IP Address, enter the IP address for your RADIUS server.
8 In the RADIUS Port field, enter the port number for your RADIUS server. The
default port is 1812.
9 In the Radius Key field, enter the secret key used by the access point and
RADIUS server.
10 In the WPA Encryption field, select your data encryption method from TKIP
(Temporal Key Integrity Protocol), AES (Advanced Encryption Standard), or
TKIP+AES.
11 Click Save/Apply to save your settings.