User Manual Part 2

4020210 Rev

Logging In to the Residential Gateway

The default configuration of the residential gateway uses IP address 192.168.1.254. If

you have connected the residential gateway correctly and you have properly

configured your computer, use the following steps to log in to the residential

gateway as an administrator.

Note: A non-administrative user may need a different user name and password for

logging in to the residential gateway. These users can access non-privileged

information.

1 On your PC, open the web browser that you prefer to use.

2 In the address field, enter the following IP address: 192.168.1.254. The system

prompts you to enter your user name and password.

3 Enter admin for the user name and 1PTV-ADM1N (where 1 is the numeral one

in both 1PTV and ADM1N) for the password. The residential gateway opens

with the System Summary page in the forefront. You can use this web interface

to check the status of the residential gateway and to configure parameters.

Note: The screens shown in this guide represent the default values for the

device.