User Manual

Cha
p
te
r
6 Securit
y
Confi
g
uration
144 4030765 Rev 01
7 In the Source Subnet Mask field, enter the subnet mask for the for the server
sending the incoming packets.
8 In the Source Port field, enter the port number for the server sending the
incoming packets. Use the following format: port or port:port.
9 In the Destination IP address field, enter the destination IP address for the server
receiving the packets.
10 In the Destination Subnet Mask field, enter the subnet mask for the server
receiving the packets.
11 In the Destination Port field, enter the port number for the server receiving the
packets. Use the following format: port or port:port.
12 Click Save/Apply to add the filter.
Removing an Outgoing IP Filter
To remove an outgoing IP filter, complete the following steps.
1 Click Security on the main screen. The MAC Filtering screen opens by default.
3-6-2009 Draft