User Manual

Outgoing IP Filtering
4030765 Rev 01 143
2 Select the Outgoing IP Filtering tab. The Outgoing IP Filtering screen opens.
3 Click Add. The Add IP Filter Outgoing screen opens.
4 In the Filter Name field, enter the name of the filter. The maximum character
length is... You cannot use blank spaces in the filter name.
5 In the Protocol field, select one of the following protocols:
 TCP/UDP
 TCP
 UDP
 ICMP
6 In the Source IP address field, enter the source IP address for the server sending
the incoming packets.
3-6-2009 Draft