User Manual

Wireless Security
4030765 Rev 01 113
 Shared. Only devices configured with the 64 bit or 128 Bit Key may access the
wireless network.
6 In the WEP Encryption field, select Enabled. The Wireless -- Security screen
populates with more fields.
7 In the Encryption strength field, choose one of the following options:
 64-bit. Secures your network by 64-bit (10 hex digit) encryption of all traffic
using a static key.
 128-bit. Secures your network by 128-bit (26 hex digit) encryption of all traffic
using a static key.
Attention: These settings must be identical to your wireless client devices.
8 Do you want the system to generate the network key for you?
 If yes, go to step 11.
 If no, you must enter your own network key(s) in the field provided. Go to
step 9.
9 In the Current Network Key field, select a network key from the drop-down list.
Values are: 1, 2, 3, or 4.
10 In the Network Key 1 field, enter the network key you wish to you use.
11 Based on the encryption strength you chose in step 7, do one of the following.
3-6-2009 Draft