User Manual

Cha

5 Home Network Confi

uration

102 4030765 Rev 01

Note: This configuration is an example of a specific setting for the residential

gateway. Your values may differ depending upon your service provider.

a In the Broadband Type field, select DSL.

b In the DSL mode field, select ATM.

c In the Broadband Connect Type filed, select MAC Encapsulation Routing

(MER).

d In the Encapsulation Mode field, select LLC/SNAP - BRIDGING.

e In the VPI field, enter the virtual path identifier (VPI). Values are: 0 to 65535

f In the VCI field, enter the virtual channel identifier (VCI). Values are:

0 to 65535

g In the Service Category field, select UBR Without PCR.

h In the Enable Virtual Port Function (Configure following parameter if the Set

Top Box has been installed) field, enable the check box.

i In the Group Name field, enter a descriptive name for the virtual port group.

j In the Automatically Add Clients With the following DHCP Vendor IDs

field, enter the DHCP option 60 string of the attached set-top boxes.

5 Click Save/Reboot to save your changes.

3-6-2009 Draft