User Manual

Default Gateway Routing
4030765 Rev 01 191
Default Gateway Routing
The Default Gateway screen allows you to make gateway assignments for devices
that are connected to the residential gateway.
Note: If you change the Enable Automatic Assigned Default Gateway check box
from unselected to selected, you must reboot the router to get the automatic
assigned default gateway.
Path: Advanced > IP Networking > Routing > Default Gateway
Assigning Default Gateways
To assign a default gateway, complete the following steps.
1 Click Advanced on the main screen.
2 Click IP Networking. The NAT screen opens.
3-6-2009 Draft