User's Manual

Power Connect the power adapter to this Power port,
and then plug the other end of the power cable
into a power outlet.
Hardware Installation
Thank you for purchasing the 54Mbps/11Mbps Wireless ADSL
Router WX-5803. The following instructions will walk you
through installation of the router.
Step 1. Connect the DSL port of the router into your ADSL
jackpoint (telephone wall socket) with the provided line cord.
Step 2. Connect the LAN port of the router to the Ethernet port
of your computer with the Ethernet cable provided.
Step 3. Connect the 16V AC power adapter to the Power jack of
router, and plug the adapter into a mains power outlet. Switch
on the router. If the power is turned on, the PWR LED on the
front panel will illuminate.
Configure the Router for the first
time
Configuring IP Settings on Your Computer
To configure WX-5803 Wireless ADSL Router for the first time,
the configuration PC must have a static IP address. Use
192.168.1.x (x is any number between 2 and 254) and subnet
mask 255.255.255.0. Specify gateway as 192.168.1.1 and enter
DNS server IP.
For Windows 2000
1. Right-click on My Network Places icon on the desktop and
then click Properties in menu.