User's Manual

Connection PC.
- Blinking – Data is being transferred over
the USB connection.
1, 2, 3, 4 LAN
Connection
Steady on when there is a link connecting
to the unit.
Blinking – Data is being transferred.
Link DSL
Connection
- Off - ADSL link is not connected.
- Blinking - ADSL is handshaking and
receiving signaling.
- Solid On - ADSL link is connected.
PPP PPP
Connection
Solid On – PPP is connected.
11G Wireless
LAN
- Sold On – When connected a client
- Blinking – Data is being transferred over
the Wireless LAN connection.
- Off – When there is no connected client
Back Panel
Connector Description
ADSL Connect one end of the RJ-11 telephone cord to
A
DSL port and connect the other end to the ADSL
line outlet that your ISP has installed.
LAN 1-4 Accept a RJ-45 Ethernet cable for connecting up
to 4 PCs. Or external Ethernet switch/hub.
USB For USB connection (optional), connect the USB
cable to the USB port and connect the other end
to the computer.
Reset Use an object, such as a stretched paper clip, to
press the button for less than 5 seconds. LAN1, 2,
3, 4 LED will light up for a short time and then be
off. You can release the button now to reset the
device. Or press the button for at least 8 seconds
to reset the device to its factory-default settings.
On/Off Turn on the router by pressing up the power
switch to the “|” position.