User's Manual

Introduction
WX-5803 Wireless ADSL Router allows you to share the single
account of Internet Access. With build-in NAT, this Router allows
up to 253 users on the Ethernet LAN simultaneously and up to
16 users on the 802.11g/b Wireless LAN simultaneously.
WX-5803 has the throughput speeds of up to 54Mbps and
advanced Orthogonal Frequency Division Multiplexing (OFDM).
In case of home usage, WX-5803 acts as a gateway for Internet
connection sharing. You can connect the Wireless ADSL Router
to your Internet connection directly, and use the wireless LAN to
connect your computers to the Internet.
Features
 Fully compliant with ANSI T1.413 Issue 2, ITU G.992.1, ITU
G.992.2, and ITU G.994.1
 Fully compliant with Wi-Fi / 802.11b Client Devices
 Delivering the fastest possible data rate defined by IEEE
802.11g standard
 Support 802.1x enhanced security with EAP-MD5 and
EAP-TLS framework
 IP sharing feature allows multiple stations to access the
internet using a single broadband
 System configuration and firmware upgrades
A Look at the Hardware
Front Panel
The WX-5803 Wireless ADSL Router has nine Light Emitting
Diodes (LEDs), or link lights, on its front panel. The following
table defines the behavior for each LED:
LED Represents Activity / Status
Power Power The Power LED will light up when the
device is powered on.
USB USB - Sold On – USB is connected to a host