User's Manual

4. It is possible to enter up to 4 different WEP Keys. The
WEP key must match between two parties for secure
communications. Enter four different keys in the
Network Key fields provided. If you choose 64-bit
encryption, enter 5 ASCII characters (or 10
hexadecimal digits). If you choose 128-bit encryption,
enter a 13-character (or 26 hexadecimal digits) WEP
key.
5. Select only one key out of the four provided in the
Current Network Key drop-down list.
6. Click Apply button. Then, the page will return to
Wireless – Security page.
7. Click Apply button to apply the settings.
MAC Filter
This feature prevents specific computers within the LAN from
accessing the Internet. To use MAC filter, perform the following
steps:
1. Click the MAC Filter tab on the left frame.
2. If you want to grant the computer specified to access the
network, check the radio button Allow. If you want to restrict
the access, check the radio button Deny.
3. Click Add button. The Wireless – MAC Filter page will appear.
4. Enter the hexadecimal MAC address (for example,
00:11:22:33:44:55) that you allow or deny access in the MAC
Address box.