User's Manual

provided by the ISP. The user may have many private addresses
masked by the single address provided by the ISP.
4. If you want to enable Firewall function, check the box
Enable Firewall. If Firewall is enabled, it will display a
Firewall submenu on the left panel after reboot.
Firewall will rejects any unsolicited data from the Internet to
access the computer on your LAN. Basically, if you do not
request data, the data will not be allowed by the firewall to pass.
5. If you want to enable IGMP Multicast, check the box Enable
IGMP Multicast. If you want to disable it, uncheck the box.
6. The default of WAN service is Enable. If you want to disable
WAN service, uncheck the box Enable WAN Service.
7. Enter a desired name in Service Name field. It is used to
identify the service.
8. Click Next button.
8. The WAN Setup – Summary page displays a summary of
all WAN setting profiles. Click Save button to save all the
settings.
9. The WAN Setup page will appear. Click Save/Reboot
button. The router will reboot automatically with the new
settings in effect.