User's Manual

III. Advanced Setup
1. Click the Advanced Setup tab on the left frame.
2. Click the WAN tab on the left frame. A WAN Setup page will
appear on the right frame. Click Add button.
3. The ATM PVC Configuration page will appear. Enter the
appropriate VPI and VCI values. Select appropriate Service
Category. Click Next.
PVC is identified by the VPI (Virtual Path Identifier) and VCI
(Virtual Channel Identifier). Consult your ISP to get the numbers.
The valid range for the VPI number is from 0 to 255 (The default
value is 0.). The valid range for the VCI number is from 32 to
65535 (The default value is 35).
There are five service categories provided: UBR Without PCR,
UBR With PCR, CBR, Non Realtime VBR, and Realtime VBR.
4. The Connection Type page will appear. There are several
ways for the device to have a public IP address and then to
access Internet. You have to check with your ISP about