User's Manual

 PPPoA with VC-MUX encapsulation
 PPPoA with LLC encapsulation
If one fails, the router will try the next. If all these connections
fail, it will try next PVC. If the responding PVC is not PPPoE or
PPPoA, it will choose the first responding PVC and run in
Bridging connection type with LLC encapsulation.
If no PVC responds to OAM, the router will use the default
settings 0/35 and run in Bridging connection type with LLC
encapsulation.
Setup DSL Connection Manually
If the ISP doesn't support the Auto-connect, you have to setup
the DSL connection manually.
Specify the values for VPI (Virtual Path Identifier) and VCI
(Virtual Channel Identifier). For the following steps to create a
DSL connection, please refer to the next section Advanced
Setup.
After you complete the DSL connection settings, a Wireless –
Setup page will appear. Enter a desired name in SSID field. This