User's Manual

II. Quick Setup
The Quick Setup will guide you through the steps necessary to
configure your DSL Router.
DSL Auto-connect
If you want your router automatically detect PVC and connect to
the network, check the box Auto-connect.
The WX-5803 has OAM (Operation, Administration and
Management) for network administration and support. It scans
PVC (Permanent Virtual Circuits) using OAM F5 cell starting
from 0/32 to 0/60, then 1/32 to 1/60, until the last PVC 8/60 or
until it receives OAM response. It skips over established PVCs.
When an OAM response is received, WX-5803 will try to
establish a connection. The following sequence is typical of a
network protocol and encapsulation your router will try to use:
 PPPoE with LLC encapsulation