User's Manual

Set MAC Filter

This feature filters specific MAC addresses within the wireless local area network (WLAN) from

accessing the network. The default MAC filter setting is Disable. If you enable the MAC

filter, only the MAC Addresses on the list grant to access the network, and the other wireless

Client MACs will be filtered by WX5801 and DENY to access anywhere.

1. Click Advanced icon on the left frame, and an Advanced setting page will appear on the

right frame.

2. Click MAC filter icon, and it will bring up a MAC filter setting table.

3. Check the enable box, and fill in the MAC address of the wireless clients you allow to

access the network. For example, check enable0 and enable1 boxes and type

00:11:22:33:44:55 and 00:AA:BB:CC:DD:EE. On this example, only the MAC

“00:11:22:33:44:55” and “00:AA:BB:CC:DD:EE” grant to access to WX5801. The other

wireless client MAC will be DENIED to access.

4. Click OK button to save your settings.

Configuration File Download/Upload

1. Click Advanced icon on the left frame, and an Advanced setting page will appear on the

right frame.